At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

 Titel: Säkerheten Främst ? en kvalitativ studie av Sandviks interna säkerhetskampanjNivå: C-uppsats i medie- och kommunikationsvetenskap, 15 högskolepoängFörfattare: Caroline HolmströmHandledare: Mats HyvönenExaminator: Mathias Sylwan Syfte: Syftet med uppsatsen är att studera hur de anställda på produktionsenheterna Wire Sandviken (WS) och Primary (PP) som ingår i produktområdet Wire and Heating Technology (WHT) inom affärsområdet Sandvik Materials Technology (SMT) på Sandvik har tagit emot kampanjen Säkerheten Främst samt att undersöka huruvida operatörer och flödeschefer har förslag på hur kommunikationsavdelningen vidare kan stötta säkerhetsarbetet och utveckla kampanjen. Dessa resultat diskuteras i förhållande till resultatet från en enkätundersökning vilken genomfördes 2014 vid WHT.                                                Frågeställningar:     - Hur har kampanjen Säkerheten Främst tagits emot av anställda vid produktion på WS och PP?- Hur kan kampanjen Säkerheten Främst ytterligare utvecklas? Metod: Kvalitativa, semistrukturerade intervjuer med flödeschefer och operatörer vid WS och PP. Totalt åtta respondenter vid fyra olika avdelningar.

Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

Wire and Heating Technology i Sandviken önskade att undersöka de interna transporterna av material samt processen vid lagerläggning av färdigt material. Detta är ett område som inte har studerats i någon vidare utsträckning inom företaget och strävan var att åstadkomma förbättringar i processerna. Interna materialtransporter och lagerhantering faller under området intern materialhantering, vilket utgör ämnet för denna studie. Syftet med examensarbetet var att kartlägga och analysera de interna materialtransporterna samt lagerläggning för färdigt material. Studien identifierade arbetssätt som klargör hur samverkan kan förbättra en verksamhets interna materialhantering.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

AbstractThis thesis examines and discusses a sample of the medieval hypocausts (stone-heating ovens) in the Baltic area. The medieval construction is thoroughly explained as well as the antique hypocaust in order to establish a base for the following discussion. The medieval hypocaust has been almost forgotten for a long period of time. The last time someone dealt with this category of finds were in the 1960?s by Swedish archaeologist Iwar Andersson and in the 1970?s by Danish archaeologist Johannes Hertz.

The purpose with this project is to compare different fuels when investing in a central combustion station at a case study farm. I have chosen to write about biofuel from an economical perspective. This because the heating costs are steadily increasing. Also because the farm in this case study has several different heating systems, which are neither profitable nor easy to work with. I have made calculations regarding usage of splinter, wood and grain for the heating system.

The background for my thesis is the fact that with rising electricity and oil prices it becomes interesting to calculate on alternative heating systems. I have chosen to calculate upon my parents? farm, which today heats the dwelling house with wood. This is very time-consuming work, time which could be spent on other work. The main objective for this study is to compare three different heating systems to decide how they differ considering effort and cost. The result from the calculations was that grain-heating system demanded the least amount of work, but the total cost was a little higher compared to chips heating. Chips heating required half as much work as today?s wood heating and had a little lower total costs compared with the corn heating. Which system to choose largely depends on how the own work is valued.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.